RAISED EXTERNAL TERRACE SYSTEM

Raised flooring is the ideal solution for outdoor paving designed for both public and private use. The system is easy to install and reposition in the event of changes to installation or modifications to the substrate. It also allows for easy management of the cable duct, pipe, and equipment, as well as swift inspection of the waterproof membrane.

The floor system has the dimensions and mass to deliver the mechanical resistance and longevity demanded by the diverse requirements of outdoor paving. It absorbs any expansion and structural movements, thus preventing the formation of cracks on the waterproofing. Whilst the absence of screed substantially reduces the burden on the structures; providing high resistance to loads.

Our adjustable supports and compensation accessories can be used to level floors, easily and quickly, while compensating for even the smaller slopes of the support plane.

The installation of the pedestal supports is extremely easy and requires very few steps: the supports are designed to be simply laid over the waterproofing membrane or any other surface to be paved. After a first rough adjustment, the laying of the chosen floor is completed with pinpoint precision by using the adjustment key. The innovative bi-component head offers an exclusive support in soft anti-noise and anti-slip rubber. The tabs can be easily removed, while the base provides innovative pre-cuts for faster and more precise installation.

ADVANTAGES

1 – Excellent hideaway for pipes and other systems
The space between the floor and the underlying membrane allows the passage of pipes and other systems, masking them but still allowing for easy inspection.

2 – Significant weight reduction
With the elimination of the concrete screed, the raised floor allows a substantial reduction of the weight on the structure, which can be built at substantially lower costs.

3 – Excellent absorption of structural movements
Being independent, the paving and supports can absorb expansion and structural movements.

4 – Floor always levelled and easily inspectable
The pedestal system makes it possible to compensate for the small differences in height and slope of the laying surface. It also allows for the laying surface and any installed services to be accessed and maintained without damaging the paving. In case of laying on waterproofing membrane, this can be easily inspected due to the absence of mechanical fixings between the covering and the supports..

5 – Speed of installation
The speed of installation ensures considerable advantages in the management of the building site, generating economic savings and increasing organisational effiency; in case of renovations, the reduced intervention time reduces any disruption to the local environment whilst works are completed.

6 – Rapid water outflow
The small open joint between one plate and the other allows the rapid drainage of water.

7 – Environmental awereness and cleanliness
Everything is recyclable, both the flooring elements and the supports’ substructure. At the end of the life of the building and / or floor, everything can be easily removed and recycled without any impact on the environment. The “dry” laying system does not require adhesives nor chemical products.

8 – Strong weight resistances
The sturdy structure of the support, which is given not only by the experience in formulating the compound but also by the continuous threading between base and screw, guarantees a strong, safe and long lasting product.

9 – Better sound insulation
Thanks to the anti-slip and anti-noise bi-component head, our supports are the only ones in the world able to reduce the sound impact level up to 25 dB.

10 – Better thermal insulation
The space between the paving and the underlying membrane favours a constant air passage. This helps extending the life of the waterproofing membrane, which is also protected from UV degradation, and improving thermal insulation.

PEDESTAL FEATURES

The pedestal system is based on a series of adjustable modular supports that simply and safely adapt to all kinds of floors. It ensures elegant, homogenous paving each time, without having to subject the building to radical structural work. It eradicates problems of damp, water infiltration and accommodates cables and pipes, whilst allowing for a quick inspections.

Self-levelling head that automatically compensates up to 5% slopes

Head with upper part in noise reducing anti-slip rubber

Smooth support base of 320 cm2

Can be used in conjunction with any outdoor flooring

Possibility of adjusting the height once the floor has been finished, thanks to the exclusive
adjustment key

Resistant to temperatures ranging from -40 °C to +120°C

Fully recyclable

Resistant to weathering, acids, UV rays and wear and tear

Easily removable tabs

Test of tensile strength certified

Utilization of Twist slope compensator

ADJUSTABLE SUPPORTS

Adjustable supports boast a wide range of features that render it perfect for any number of raised flooring applications, including noise-reducing rubber ends, a special adjustment key, variable heights and a pre-cut base for wall corner cuts.

Featuring an above average tensile strength and a reliability that can only be offered by experts in the field of raised flooring supports, this product is regularly selected and widely appreciated throughout the building industry worldwide.

The adjustment of the slope takes place via the appropriate Twist slope compensators.

TESTED FOR LOADING BEARING CAPACITY


ADVANTAGES

• Head with upper part in noise-reducing anti-slip rubber
• Easily removable tabs
• Precision adjustment from 25 mm
• Possibility of adjusting the height once the floor has been finished, thanks to the exclusive adjustment key
• Smooth support base of 320cm2
• Utilisation of Twist slope compensator TW 110
• Resistant to temperatures ranging from -40°C to +120°C
• Resistant to weathering, common, environmental acids, UV rays and wear and tear
• Can be used in conjunction with any outdoor flooring
• Entirely recyclable
•Test of tensile strength certified

ADJUSTABLE AND SELF-LEVELLING SUPPORTS

The adjustable support with a tilting head was the first in a long line of accessories for exterior floating floors. It is a raised flooring product that combines superb technical features and exceptional aesthetics with maximum ease of installation.


It has come to be recognised as the market’s most exclusive solution for dealing with sloping installation surfaces. In this regard, the product can provide exceptional results thanks to its tilting movement, which can compensate for slopes of up to 5%. The adjustment is performed using the adjustment key, which can be applied from above once the flooring has been installed and guarantees the precision alignment of the entire floor surface.


This unrivalled product also boasts numerous additional advantages, which are enjoyed every day around the globe by architects, builders and installers alike.

TESTED FOR LOADING BEARING CAPACITY

ADVANTAGES

• Self-levelling head that automatically compensates slopes up to 5%
• Head with top in soft non-slip and anti-noise rubber
• Tabs easy to remove
• Adjustable height from 28 to 550 mm once pavement is finished thanks to exclusive adjustment key
• 320 cm2 smooth support base
• Resistant to temperatures between -40°C to 120°C
• Resistant to weathering, common, environmental acids, UV rays and wear and tear
• Suitable to any self-supporting outdoor paving system
• Entirely recyclable
• Test of tensile strength certified

WINDPROOF SYSTEM WITH ADJUSTABLE SUPPORT

The windproof system is designed to solve the problem of plate lifting caused by the wind in a safe, permanent and economical way.
The system guarantees a solid bond between the flooring plates and the supports, and it consists of metal clips that are inserted into the spacer fins of the supports which, thanks to the particular “T” or “L” shape, block the flooring plates.
The plates must be mechanically notched in the 4 corners in order to allow the insertion of the clips.
The system is ideal because it firmly attaches the supports and plates to each other. In this way the flooring becomes one with the system and the plates, being linked to one another, impose more resistance towards the winds’ sucking power.
The system is compatible with Adjustable series supports using the XL double-material windproof head: the XLW head.

ADVANTAGES

• Invisible, the flooring maintains its original aesthetic.
• Removable, It allows for the inspection of the underlying surface with the simple removal of the elements
• Adjustable. You can still adjust the supports in height, even on the finished floor.
• It does not require adhesives or screws.
• Absorbs expansion and structural movements.
• It can also be installed on pre-existing terraces.
• It is compatible with any type of plates, planks, slats.

BASIC SELF-LEVELLING ADJUSTABLE SUPPORT

Basic Self-Levelling Adjustable Support – from 37 to 307 mm. The supports can provide exceptional results thanks to its tilting movement, which can compensate slopes up to 5%.


The product is easily adjusted throughout the installation; adjustment is performed using a regulation key, which can be applied from above once the flooring has been installed and guarantees the precision alignment of the entire floor surface.

FEATURES

• Self-levelling head that automatically justifies slopes to 5%
• Adjustable height from 37 to 307 mm once pavement is finished thanks to exclusive regulation key
• 300 cm2 smooth base support
• Entirely recyclable
• Resistant to temperatures between -40° to 120°C
• Resistant to acids and ultraviolet deterioration
• Suitable to any self-supporting outdoor paving system
• Head with upper part of soft non-slip and anti-noise rubber

ADVANTAGES

• Bi-material self – levelling head PP + rubber anti-noise and anti- slip
• Easily removable tabs
• Millimeter adjustment with adjustment key
• Adjustable in height even on finished floor thanks to the exclusive regulation key
• 320 cm2 smooth supporting base
• Security lock for unscrewing
• Resistant to temperatures between -40° and 120°
• Resistant to atmospheric agents, acids, aging, UV rays
• Suitable to any self-supporting outdoor floor system
• Entirely recyclable
• Certified breaking load tests

BASIC SELF-LEVELLING ADJUSTABLE SUPPORT

The unique adjustment key is an essential element of the raised flooring system as it allows to control the height of the individual supports, and consequently of the floor above, even after installation of the flooring, thus avoiding having to lift the tiles.
Detail of the steel screwdriver accessory for “quick unscrewing and screwing”.

*Suitable only with standard 4 mm thick tabs. between -40° to 120°C

• Resistant to acids and ultraviolet deterioration
• Suitable to any self-supporting outdoor paving system
• Head with upper part of soft non-slip and anti-noise rubber

PERIMETER SPACER

The perimeter spacers allow the elegant and uniform spacing of the flooring slabs from the perimeter walls, offering the maximum guarantee of stability by means of a hooking system to the supports that is intuitive, simple and effective.

The clip creates a 1 cm joint between the flooring and the wall, offering space for physiological stabilisation of the slabs. The special design of the clip allows the support to any vertical coverings placed on the walls without compromising the seal with invasive measurements. At the same time, it allows the installer to adjust its position on the support head according to the positioning requirements.

ADJUSTABLE UNIVERSAL ZINC-PLATED LIFTING HANDLE

The lifting handle is available in a fixed size for standard slabs sizes of 600 mm.
The handle is provided with two lateral hooks that are inserted into the open joints and allow lifting even when they are already laid. It is a very useful tool, both when laying new floors and when lifting already laid plates.

INSTALLATION GUIDE